Rear seat for bronze
Posted: Sat Jul 10, 2010 12:29 amI need a rear seat for my bronze.
Does anyone know what car they come from?
Does anyone know what car they come from?
Midas Cars Forum - www.midascarsforum.com
This forum is for Midas and Midtec Bronze enthusiasts. The Midas is a British car designed as a replacement for the Mini Marcos.
http://midasownersclub.co.uk/forums/
Rear seat for bronze
http://midasownersclub.co.uk/forums/viewtopic.php?f=22&t=937
Page 1 of 1
Posted: Sat Jul 10, 2010 12:29 amRe: Rear seat for bronze
Posted: Sat Jul 10, 2010 6:28 amThey are bespoke thay don't come from another car. They were a fibre glass moulding that followed the dip in the rear floor with a hinged upright in 1/2" plywood for the upright and along the top edge of the upright there was 3/4" square tube with metal 'cotton reels' each end that latched into a bracket bolted to the shell above the rear arches. These were an optional extra and not many of them were supplied. You will have to likely fabricate something yourself as I suspect the chance of finding one is remote.
Re: Rear seat for bronze
Posted: Sat Jul 10, 2010 10:31 amDag nabbit.
Guess i'll have to grab the tape messure and strat climbing round scrap yards looking for a substitute.
If i find one, i'll post it for other bronze owners.
Have found a seat for the rear of my bronze, the back comes from a 1998 vauxhall tigra and the base from a 1976 mgbgt
Guess i'll have to grab the tape messure and strat climbing round scrap yards looking for a substitute.
If i find one, i'll post it for other bronze owners.
Have found a seat for the rear of my bronze, the back comes from a 1998 vauxhall tigra and the base from a 1976 mgbgt