At last we are getting around to some bigger bits!!
Posted: Tue Nov 06, 2012 9:31 pmMidas Cars Forum - www.midascarsforum.com
This forum is for Midas and Midtec Bronze enthusiasts. The Midas is a British car designed as a replacement for the Mini Marcos.
http://midasownersclub.co.uk/forums/
At last we are getting around to some bigger bits!!
http://midasownersclub.co.uk/forums/viewtopic.php?f=23&t=1753
Page 1 of 1
Posted: Tue Nov 06, 2012 9:31 pmRe: At last we are getting around to some bigger bits!!
Posted: Wed Nov 07, 2012 5:39 pmAre these recently cast pieces?
Re: At last we are getting around to some bigger bits!!
Posted: Wed Nov 07, 2012 10:40 pmThey were moulded about 10 years ago. Charlie spent a small fortune having some moulds made by the same guys who make the front ends of Eurostar trains. They are extended a little at the back end so they are good with narrow and wide arch cars.
The first pair went on my narrow arch mk2 which was having it's first restoration at the time.
The first pair went on my narrow arch mk2 which was having it's first restoration at the time.
Re: At last we are getting around to some bigger bits!!
Posted: Thu Nov 08, 2012 9:09 pmThese are the original Charlie mouldings as stated above by mike. No new ones will be produced by the Dodd Family. The Moulds for these will also end up on ebay. I Think you will find that at today's labour rates these represent a Bargain!
AC
AC
Re: At last we are getting around to some bigger bits!!
Posted: Mon Nov 12, 2012 10:54 pmBy way of update the Charlie Dodd rear light unit upgrade moulds for the Mk3 coupe and Convertible will be listed very soon, search under Shedseller11.
AC
AC
Re: At last we are getting around to some bigger bits!!
Posted: Thu Nov 15, 2012 5:50 pm