Not sure if these fit, so may be worth checking the offset prior to bidding.
http://www.ebay.co.uk/itm/Midas-Gold-13 ... 461578f809
Midas Cars Forum - www.midascarsforum.com
This free forum is for Midas and Midtec Bronze enthusiasts. The Midas is a British car designed as a replacement for the Mini Marcos.
Revolution wheels for a Gold?
Moderator: The Midas Forum Staff
4 posts
• Page 1 of 1
Revolution wheels for a Gold?
by Hans Efde » Thu Nov 07, 2013 3:49 pm
-
Hans Efde - Posts: 1731
- Joined: Sat Dec 06, 2008 10:11 pm
- Location: IJlst, Netherlands
Re: Revolution wheels for a Gold?
by Stuart » Thu Nov 07, 2013 4:28 pm
They'd stick out a bit on a mk 3 and also need the inner part of the centre bore enlarged, OK for the mk 2 of course if you like big heavy wheels.
-
Stuart - Posts: 1719
- Joined: Tue Dec 02, 2008 8:29 pm
- Location: Derbyshire
Re: Revolution wheels for a Gold?
by Hans Efde » Thu Nov 07, 2013 5:07 pm
Stuart wrote:They'd stick out a bit on a mk 3 and also need the inner part of the centre bore enlarged, OK for the mk 2 of course if you like big heavy wheels.
That could be a milling job in one go. Enlarge the bore and take a bit from the inner flange.
-
Hans Efde - Posts: 1731
- Joined: Sat Dec 06, 2008 10:11 pm
- Location: IJlst, Netherlands
Re: Revolution wheels for a Gold?
by Stuart » Thu Nov 07, 2013 5:43 pm
You can't take much off the centre though due to the position of the wheel nut fixings.
-
Stuart - Posts: 1719
- Joined: Tue Dec 02, 2008 8:29 pm
- Location: Derbyshire
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 25 guests