Page 1 of 1
NEW MIDAS OWNER
Posted:
Wed Oct 14, 2015 2:54 pmby Inim666
Hi guys just a quick hello , i am a new owner of a midas decathlon number D3 which was purchased from minisprint. hopefully it will be on the road as soon as can be... hopefully i can get it offically registered as a midas without too much bother
Re: NEW MIDAS OWNER
Posted:
Wed Oct 14, 2015 3:08 pmby Rich
Welcome to the forum!
Re: NEW MIDAS OWNER
Posted:
Wed Oct 14, 2015 4:16 pmby Stuart
Rich wrote:Welcome to the forum!
Or welcome to the minority who post. and better late than never
Good luck with getting the car on the road.
Re: NEW MIDAS OWNER
Posted:
Thu Oct 15, 2015 2:58 pmby goldeneye
Pictures?
Re: NEW MIDAS OWNER
Posted:
Thu Oct 15, 2015 4:05 pmby DavidL
goldeneye wrote:Pictures?
Especially if it's a Decathlon - best colour...
Re: NEW MIDAS OWNER
Posted:
Thu Oct 15, 2015 5:34 pmby Jvr19630
Welcome to the forum
Re: NEW MIDAS OWNER
Posted:
Fri Dec 04, 2015 9:11 pmby Inim666
Hi guys sorry for the late reply been busy working on the beast and trying to get it sorted out...
So far I have sorted the electrics and a bit of the interior as it's had many an owner but never been on the road.. And my next job is to fit a mini mpi heater as its twin speed
Re: NEW MIDAS OWNER
Posted:
Sat Dec 05, 2015 1:38 pmby kelvink
Inim666 wrote:Hi gu it's had many an owner but never been on the road..
Wow that's a rarity should be rather nice when you get it finished. Will be interesting to see how you get it registered and how that goes.
Re: NEW MIDAS OWNER
Posted:
Sun Dec 20, 2015 11:40 pmby Inim666
Well a bit of work on the green beast today and I managed to find out that the front section of carpet is missing so I'm now in the process of talking to a local trimmer about making some for me but need a template to use. Other than that I'm scratching my head as to how I will be fitting the mini twin speed heater as its a slightly different shape to the old single speed unit
Re: NEW MIDAS OWNER
Posted:
Sun Jan 10, 2016 6:23 pmby Inim666
Heater is fitted finally with a bit of modification to the original lugs. Power unit is built and ready to go in now to sort out heater hoses and find a xr2 centre vent duct