Another question from me,
What thermostat housing does everybody use? (on the a-series based midas)
I'm struggling to find a housing that does not angle upwards / to the passenger side, like the classic mini housing, but is 'flat' and points forwards.
I used to have an allegro type one with a plastic bung in the top, but the bung snapped, and I mistakenly replaced it with a metro 'sandwich' type, albeit without the sandwich, which unfortunately with an engine steady meant studs and original length bolts were too short, and sandwich plate length bolts are too long needing 1.5cm high standoffs/ spacers!
As always any help, much appreciated.