Interesting fastenings for side panels or dash?
http://www.bighead.co.uk/poppit/index.html
Midas Cars Forum - www.midascarsforum.com
This free forum is for Midas and Midtec Bronze enthusiasts. The Midas is a British car designed as a replacement for the Mini Marcos.
Poppits
Moderator: The Midas Forum Staff
4 posts
• Page 1 of 1
Poppits
by manifold » Tue Apr 28, 2009 6:07 pm
Midas Cars Forum & Facebook Page Founder
Midas Gold Convertible: 1380 steel 16v KAD & 5 sp dog box, Titanium mania, KAD fr/rear callipers, CF Steering
Midas Gold Coupe: 1380 7 port xflow, SC/CR gearbox, Titanium mania, CF Steering & seats.
Midas Gold Convertible: 1380 steel 16v KAD & 5 sp dog box, Titanium mania, KAD fr/rear callipers, CF Steering
Midas Gold Coupe: 1380 7 port xflow, SC/CR gearbox, Titanium mania, CF Steering & seats.
-
manifold - Posts: 1724
- Joined: Tue Dec 02, 2008 7:34 pm
- Location: Lancaster, Lancashire
Re: Poppits
by Hans Efde » Tue Apr 28, 2009 9:18 pm
I am a big fan of these:
http://shop.ebay.co.uk/?_from=R40&_trks ... Categories
Just fastened my rear undertray with the stubby M4 ones. Also very handy for the door cards, provided you don't mind seeing the bolt heads. I've bought very nice stainless steel Allen key bolts that do the job.
http://shop.ebay.co.uk/?_from=R40&_trks ... Categories
Just fastened my rear undertray with the stubby M4 ones. Also very handy for the door cards, provided you don't mind seeing the bolt heads. I've bought very nice stainless steel Allen key bolts that do the job.
-
Hans Efde - Posts: 1731
- Joined: Sat Dec 06, 2008 10:11 pm
- Location: IJlst, Netherlands
Re: Poppits
by manifold » Tue Apr 28, 2009 10:51 pm
They use these on motorbike fairings dont they?
They look good, not sure about using them on door cards though, wouldnt the rivnuts with washers on the back be better?
They look good, not sure about using them on door cards though, wouldnt the rivnuts with washers on the back be better?
Midas Cars Forum & Facebook Page Founder
Midas Gold Convertible: 1380 steel 16v KAD & 5 sp dog box, Titanium mania, KAD fr/rear callipers, CF Steering
Midas Gold Coupe: 1380 7 port xflow, SC/CR gearbox, Titanium mania, CF Steering & seats.
Midas Gold Convertible: 1380 steel 16v KAD & 5 sp dog box, Titanium mania, KAD fr/rear callipers, CF Steering
Midas Gold Coupe: 1380 7 port xflow, SC/CR gearbox, Titanium mania, CF Steering & seats.
-
manifold - Posts: 1724
- Joined: Tue Dec 02, 2008 7:34 pm
- Location: Lancaster, Lancashire
Re: Poppits
by Alan D. » Wed Apr 29, 2009 7:22 am
I'm a fan of "Rivnuts".
But it's hard work trying to squeeze gun closed on the bigger sizes, especially with stainless rivnuts.
So I've found this tool which makes life easier.
http://www.industrialfastenings.co.uk/i ... -tool.html
Alan
But it's hard work trying to squeeze gun closed on the bigger sizes, especially with stainless rivnuts.
So I've found this tool which makes life easier.
http://www.industrialfastenings.co.uk/i ... -tool.html
Alan
-
Alan D. - Posts: 945
- Joined: Fri Dec 05, 2008 10:34 pm
- Location: Newcastle upon Tyne
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 18 guests