From the beginning of owning this car I had problems with the radiator hose that runs from the waterpump to the lower LH corner of the radiator. I believe the original Metro item is a metal pipe but on my Midas it is a rubber hose. It tends to hang on the Y-shaped engine bracket and sometimes comes close to the pulley.
I installed a new hose during the rebuild but the problem was still there despite a bit of fiddling:
Therefore I built a small "cradle bracket" with a piece of 3mm rod and a strip of steel:
End result:
You can still see the indent the engine bracket left on the hose.
Next step will be a similar solution to the other radiator hose that has the same problem.