by fozzza » Fri Jan 08, 2016 10:28 pm
Stuart is correct that the mounting is the wrong way round, I have copied and pasted an exert from the Midas manual so you Know how they should be fitted.
The later type (post October 1976) ‘single bolt’ subframe
must be used. This subframe is rubber mounted, and the
first step is to fit the 2 front, and 2 rear rubber
mountings. NB: The front rubber mountings are fitted with
the centre hole secured to the subframe and the body
mounting hole vertically BELOW the centre hole. Make sure
the centre bolt is tight as it is inaccessible after
assembly. Also file off the metal pin on the mounting as it
is not used on the Midas. The rear mountings fit with
their flange BELOW the subframe.
Roy