Page 1 of 2

XWC 296 S - another Midas now on the road

PostPosted: Sat Nov 22, 2014 12:32 pm
by mfdriver
Despite the drizzle this morning I took the car out for a run to the newsagent and back. caused great excitement amongst the customers as the exhaust manifold bandage is still settling in, and all thought the car was on fire. All was well and only disappointment is that speedo doesn't work but mileometer does - I assume the cogs have gone for the needle and so it will be impossible to do an easy fix. I run my Cooper S with a digital GPS speedo which works well, so will go down that route.
Just thought you would like to know there is another one back on the road.

Re: XWC 296 S - another Midas now on the road

PostPosted: Sat Nov 22, 2014 1:17 pm
by Hans Efde
That's great news. Congrats with another one saved. Please share some pics with us.

Re: XWC 296 S - another Midas now on the road

PostPosted: Sat Nov 22, 2014 2:19 pm
by kelvink
Out on the road is where these cars should be! Well done, I trust you took the long way to the Newsagents :) I think that speedo needs some exercise to get it working it's clearly ceased up from being idle too long

Re: XWC 296 S - another Midas now on the road

PostPosted: Sat Nov 22, 2014 10:13 pm
by mfdriver
Will post pics when the front and rear panels come back from spray shop- joy of Mk 2 Bronze is can still drive around in it with those bits removed!
Will head in the Blandford direction soon.

Re: XWC 296 S - another Midas now on the road

PostPosted: Tue Nov 25, 2014 4:58 pm
by mfdriver
Took Midas to Maniflow in Salisbury this morning to have bespoke exhaust system fitted. They have done a fantastic job and I recommend them to everyone thinking of upgrading their system. I was so impressed when shown the finished job up on the lift that I forget to take any pictures. That's what happens when you get old.
Two cherry bomb silencers and long tailpipe exiting to right rear makes for a wonderful mini exhaust note.
I guess I am very lucky living near Salisbury, as have Maniflow, Burlen/SU and Slark Race Engineering all within 25 minutes drive away.
Electrics tomorrow to fit auxiliary outlet for digital GPS speedo and then just waiting for final painting to be done.

Re: XWC 296 S - another Midas now on the road

PostPosted: Sun Dec 14, 2014 5:08 pm
by mfdriver
See photos section on this Forum for spray shop update

XWC 296 s - Final progress report

PostPosted: Tue Dec 16, 2014 3:40 pm
by mfdriver
Midas 5.jpg
Midas 5.jpg (64.16 KiB) Viewed 9880 times
Midas 4.jpg
Midas 4.jpg (65.17 KiB) Viewed 9880 times
Midas 3.jpg
Midas 3.jpg (63.41 KiB) Viewed 9880 times



Its finished!
A picture speaks a thousand words

Re: XWC 296 S - another Midas now on the road

PostPosted: Tue Dec 16, 2014 10:38 pm
by Jin
That looks fantastic, is it a full re spray or just the grey bits?
Good combo, gives me a few ideas

Re: XWC 296 S - another Midas now on the road

PostPosted: Tue Dec 16, 2014 10:55 pm
by mfdriver
Its more RAF blue than grey, or am I being picky! It is photographed in artificial light - I will take some more when I collect it on Friday.
The repaint is just the coloured bits, I couldn't afford to do the whole car.
I found an all white car a bit hard to cope with, especially trying to polish it in sunny weather - snow blindness.
Also a vast expanse of white seemed to attract a large swarm of flies!!
My other half is impressed (she chose the colour - good tactic) so it must be alright

Re: XWC 296 S - another Midas now on the road

PostPosted: Tue Dec 16, 2014 11:43 pm
by justamin
Looks nice! I am just behind you with my Mk 2. hopefully back on the road soon after an 11 year 'rest'. MOT work tomorrow and hope to have brakes..