Q959EGV k-series mk3

Newbie? Introduce yourself here!

Ring the bell and say "Hi" by telling us a little about you and your cars. We always have someone in who'll get the door and welcome you to the family!

Moderator: The Midas Forum Staff

Q959EGV k-series mk3

Postby Joris » Tue Aug 13, 2019 2:09 am

Hi all,

I’ve always (well, for the last 30 years anyway) wanted a Midas and now I’ve located one.
Convincing the wife that this is the ideal car for our family of 5 is going to be challenging but I’m hopefull!

It is a black 1988 Mk3 Coupe with a k-series engine fitted. The current reg is Q959EGV. Can anyone tell me if this is the car that used to belong to Stan Armstrong and then to John Mellors?

Best regards,
Joris
User avatar
Joris
 
Posts: 3
Joined: Tue Aug 13, 2019 12:17 am
Location: Cork, Ireland

Re: Q959EGV k-series mk3

Postby IanJ » Wed Aug 14, 2019 12:50 pm

Hi Joris,

Welcome to the forum. I’m a fairly newbie to the Midas mk3 family and at present, at the start of a complete restoration, so unfortunately I can’t help with answering your questions about previous owners of your car. However it’s good to have you onboard and hopefully we will see you at some of the club events and gatherings. It’s also good to see the mark beginning to have a kind of renaissance.
Best regards
Ian
IanJ
 
Posts: 18
Joined: Wed Dec 21, 2016 3:30 pm

Re: Q959EGV k-series mk3

Postby fozzza » Wed Aug 14, 2019 3:06 pm

Hi Joris.
Welcome to the forum, I do believe that it is the MK3 that Stan converted to a K series. He spoke about it a couple of months ago when I met him at the Moffat car rally.
Roy
User avatar
fozzza
 
Posts: 214
Joined: Sun Nov 22, 2015 5:25 pm
Location: Wolverhampton, West Midlands

Re: Q959EGV k-series mk3

Postby Joris » Fri Aug 16, 2019 11:43 pm

Thanks for the warm welcome!
User avatar
Joris
 
Posts: 3
Joined: Tue Aug 13, 2019 12:17 am
Location: Cork, Ireland

Re: Q959EGV k-series mk3

Postby Alan D. » Mon Aug 19, 2019 10:37 pm

Hi Joris,
If you want to speak to Stan, I'm sure he would be happy to do so. Just PM a number and I will get him to call you.
Welcome to the forum.
Regards Alan Donowho
User avatar
Alan D.
 
Posts: 928
Joined: Fri Dec 05, 2008 10:34 pm
Location: Newcastle upon Tyne

Re: Q959EGV k-series mk3

Postby Joris » Mon Aug 19, 2019 10:45 pm

Hi Alan,
Thanks for that. I tried to click on “contact Alan” but it doesn’t work. I suppose I need to have some more activity on the forum before I’m allowed to P.M.
I’ll PM you as soon as I can.
Best, Joris
User avatar
Joris
 
Posts: 3
Joined: Tue Aug 13, 2019 12:17 am
Location: Cork, Ireland

Re: Q959EGV k-series mk3

Postby stan1396 » Sat Aug 24, 2019 8:10 pm

Hi Joris, Had a call from Alan today to say you wanted to speak to me. Its been a while since I rebuilt the car so will have a bit of thinking to do! I found it on a farm in 2002 in a hell of a mess. There was even a chickens egg on the manifold and 2ins of water inside. I tried to steadily improve it over the years, but it has been through other hands now, who probably made a better job than me!
One thing I think may need improvement is the front springs. I tried 3 different ratings and still didn't get it right. My mate Ian probably got it right when he said look at the identity number plate, under the bonnet and it has the front axle weight on there. Add 2 passengers weight and half it to give your poundage,- that should give a good start point. Of course this could have been altered by someone else since.
Alan can give you my e mail and tel number if you want to speak direct. Going out now so it will have to be tomorrow. hope you enjoy the car as much as I did! Stan.
PS, splashed out 18 months ago on a BMW Z4 coupe, 3 ltr straight six,100,000 on the clock 07 plate, but just ran in really!
stan1396
 
Posts: 40
Joined: Fri Dec 05, 2008 9:15 pm


Return to The Doorbell - Introduce yourself

Who is online

Users browsing this forum: No registered users and 1 guest

cron