Midas Cars Forum - www.midascarsforum.com

Hi all, as some of you may know, i own JST Graphic Designs and we now have midas stickers for sale.

These are made from high quality 7 to 10 year calendared vinyl for a long lasting fitment. They are made up of the following:

Chrome background
Red and blue Midas logo (same as forum header)
Black text

We are doing these at £5.50 a pair which will include delivery.

The text and logo measure 165 x 35mm

Also able to produce these in etched glass effect for internal fitment. Can also be made to any size and in most colours of the spectrum.

We will also produce graphics of other designs, please contact me with any questions.

In Holland we wanted to have "Dutch Midas Squadron" stickers made that looked like this:

It is about 22x4 cm, contains orange, red, white and blue on a clear background (in the picture the sticker has a black background, but this was just because I did not know how to do a clear background in Coreldraw). Unfortunately noone could make a sticker with white in it on a clear film in a small quantity. Do you have the machines to make something like this?

Give me an address and ill make ONE and send it out to you for you to look at. Our work is not printed but rather Vinyl so are able to produce almost anything.

As a thaught, is there any reason for it being on a clear backing? is it just so you dont see the backing?

Most of us wanted to put it on the windscreen or on the car. Then a clear film is the prettiest. Do you have another suggestion? Maybe no backing at all if that's possible to get on the car?

I would suggest no backing at all. The way we would do the construction of the graphic would be as follows:

Make the Text and apply to a backing tape, make the logo and apply this to a backing tape. Once all is in the right place we would fit the application front tape. All the end user (you) needs to do then, is peel of the baccking tape, fit the grapic where it needs to be, smooth down and gently peel of the application tape. Its as easy as that.

How many was you looking for Hans?

Artwork is now done for these on our computer and ready to cut. If you send me an address via PM i will cut one and send it to you for you to look at. This will be for free as we will do it as a trial cut for you.

We have produced ONE of these which we have stuck to our office window. We will take a picture as soon as the cam has some charge in the battery and we will post it on the forum for all to see.

Sorry if the piccy quality doesnt look to good, but we have some bad light in the office (helps being in front of a pc all day) and if we use the flash we get nothing but glair. But i think you will get the point of the piccy.