Midas Cars Forum - www.midascarsforum.com

Posted: **Thu Nov 07, 2013 3:49 pm**

Not sure if these fit, so may be worth checking the offset prior to bidding.
http://www.ebay.co.uk/itm/Midas-Gold-13 ... 461578f809

Posted: **Thu Nov 07, 2013 4:28 pm**

They'd stick out a bit on a mk 3 and also need the inner part of the centre bore enlarged, OK for the mk 2 of course if you like big heavy wheels.

Posted: **Thu Nov 07, 2013 5:07 pm**

Stuart wrote:They'd stick out a bit on a mk 3 and also need the inner part of the centre bore enlarged, OK for the mk 2 of course if you like big heavy wheels.

That could be a milling job in one go. Enlarge the bore and take a bit from the inner flange.

Posted: **Thu Nov 07, 2013 5:43 pm**

You can't take much off the centre though due to the position of the wheel nut fixings.

Midas Cars Forum - www.midascarsforum.com

Revolution wheels for a Gold?

Revolution wheels for a Gold?

Re: Revolution wheels for a Gold?

Re: Revolution wheels for a Gold?

Re: Revolution wheels for a Gold?