Page 4 of 5
Re: Something I have been working on.....
Posted: Tue Jan 19, 2010 11:13 pm
by Rich
I bet that made your eyes cross David!
Re: Something I have been working on.....
Posted: Tue Jan 19, 2010 11:45 pm
by manifold
Your not wrong there!
Nothing like the satisfaction of building it up, flashing the firmware and watching it run the engine first time! (even if it is only ignition at the moment).
Re: Something I have been working on.....
Posted: Wed Jan 20, 2010 12:16 am
by Rich
Indeed, doing the V4 Megajolt was a satisfying experience.
I'm interested in the injection but I hear differing reports on how effective it is on the 5 port heads. I could, at a push get hold of a SPi system from a 1275 Mini which I understand is pretty effective when used with MS and rather unpromising when used with the Rover system.
Rich

Re: Something I have been working on.....
Posted: Wed Jan 20, 2010 12:31 am
by manifold
I know what you mean with the siamese ports issue. Not a problem with mine, using the crossflow heads
Turbominis forum has some interesting info on siamese port code though for Megasquirt. Sounds promising.
Just ordered a Innovate LC1 wideband to plug into the MS2 so I can do the self teaching mode.
Re: Something I have been working on.....
Posted: Wed Jan 20, 2010 8:58 pm
by Geoff Butcher
Re: Something I have been working on.....
Posted: Wed Jan 20, 2010 11:18 pm
by Rich
Thank you Geoff,
Am I right in thinking he's used the throttle body from the Mini SPi system?
Rich

Re: Something I have been working on.....
Posted: Thu Jan 21, 2010 7:47 pm
by stan1396
lights look brilliant,think Alan Donohoe will be having a word! Stan.
Re: Something I have been working on.....
Posted: Thu Jan 21, 2010 10:11 pm
by manifold
Cheers Stan. Just got to get some lenses to go with them but I think they should do the trick.
Hows your Corsa Spyder getting on. It looks great. My wife likes them. Every time she sees a picture of one she says she wants one

.
Re: Something I have been working on.....
Posted: Thu Jul 29, 2010 10:28 pm
by manifold
Re: Something I have been working on.....
Posted: Fri Jul 30, 2010 12:17 am
by Rich
That's just showing off David.......... love it!