The problem with my current scuttle panel is although it looks nice, it's just a ledge that allows water from the screen to pour in and fill the bulkhead ledge and pours all over the fan motor invariably giving it excuses to play up
Also, back when I made it I just coppied the shape from the original one including the big cutout for the wiper arm
Time for a redesign.
Fresh piece of board obtained plus some 20mmX20mm PVC angle and some nifty stainless flange head screws only 6mm long
Ain't the Internet a wonderful place?
Drilled the PVC to accept a 1/2" tube support
Screwed it all together
And upgraded to 2 washer jets
Piece of half inch PVC pipe on the brass tube support
And
Works a treat, even copes with the hosepipe