Fresh Dutch Midas owner

Newbie? Introduce yourself here!

Ring the bell and say "Hi" by telling us a little about you and your cars. We always have someone in who'll get the door and welcome you to the family!

Moderator: The Midas Forum Staff

Re: Fresh Dutch Midas owner

Postby astonmartine » Thu Nov 05, 2009 1:17 pm

Last Sunday, the process of restoring the Midas has started. There is a lot to do. Unfortunately, more than expected :s
All the wiring is a complete mess.
Engine is running well, but makes a nasty tractor-like sound when it's revved.
Lots of small bits are broken or completely worn.
Exhaust is leaking.
All tires are different, so it's best to replace them all.

I'm more and more starting to wonder how on earth this little car has ever brought us from Londen to the Netherlands without breaking down :p

So all in all, it needs complete overhauling. Good thing is that most bits are repairable, so hopefully no huge costs there. And at least when everything is freshly repaired, I can be assured that will be alright for the coming years.
User avatar
astonmartine
 
Posts: 63
Joined: Tue Jul 28, 2009 12:38 pm
Location: Netherlands

Re: Fresh Dutch Midas owner

Postby manifold » Thu Nov 05, 2009 2:15 pm

it sounds like mine was when I got it.

Nothing a new set of plugs, leads and recon distributor didnt sort out.

Might be worth checking valve gaps too.

(Hopefully) that will do the trick.
Midas Cars Forum Founder & Midas Facebook Group Page Founder (personal facebook account deactivated)

Midas Gold Convertible: 1380

Midas Gold Coupe: 1380
User avatar
manifold
 
Posts: 1787
Joined: Tue Dec 02, 2008 7:34 pm
Location: Lancaster, Lancashire

Re: Fresh Dutch Midas owner

Postby Hans Efde » Thu Nov 05, 2009 2:50 pm

That's bad news Martine. To cut costs down you could think of buying a secondhand Metro, or one from the breakers yard. Will cost you 500 euro's max and then you'll have all the mechanical bits (and hopefully a better engine).
Cheers, Hans
User avatar
Hans Efde
 
Posts: 1732
Joined: Sat Dec 06, 2008 10:11 pm
Location: IJlst, Netherlands

Re: Fresh Dutch Midas owner

Postby astonmartine » Fri Nov 06, 2009 9:05 am

Already visited a scrapyard and got some nice parts from some Metro's there :)

The engine runs fine and has plenty of power, so I'll probably leave it until it dies completely. I could enjoy it for another few years.
Quite strange though, because the previous owner spent quite some time and effort on the engine.
User avatar
astonmartine
 
Posts: 63
Joined: Tue Jul 28, 2009 12:38 pm
Location: Netherlands

Re: Fresh Dutch Midas owner

Postby Hans Efde » Fri Nov 06, 2009 10:51 am

Maybe it's something simple then like an ignition timing misadjustment. Easy to do some trouble shooting on these engines. If the compression is oke and if there are no issues with overheating, water and oil (leakage, consumption), plugs, valve gaps and timing is fine (maybe change the distributor to change the advance), then see if the exhaust gasket is not leaking. If all is oke, then hopefully no chunks of metal or metal film on the oil and in the oil filter. Because the final cause will be too much play on the crankshaft.
Cheers, Hans
User avatar
Hans Efde
 
Posts: 1732
Joined: Sat Dec 06, 2008 10:11 pm
Location: IJlst, Netherlands

Re: Fresh Dutch Midas owner

Postby astonmartine » Sat Nov 07, 2009 12:39 pm

Unfortunately, metal was found in the oil :s
Oilpressure is a bit better now after some adjustments, but this does mean that the engine won't survive very long.
I'll probably drive it until it really dies.

After that, time to keep my eyes open for a nice new engine.
Any suggestions, apart from the standard 1300?
User avatar
astonmartine
 
Posts: 63
Joined: Tue Jul 28, 2009 12:38 pm
Location: Netherlands

Re: Fresh Dutch Midas owner

Postby manifold » Sat Nov 07, 2009 1:03 pm

astonmartine wrote:Unfortunately, metal was found in the oil :s


thats pretty normal for the transverse A series. As it runs in the same oil as the gearbox.

Regular oil changes counter this though.
Midas Cars Forum Founder & Midas Facebook Group Page Founder (personal facebook account deactivated)

Midas Gold Convertible: 1380

Midas Gold Coupe: 1380
User avatar
manifold
 
Posts: 1787
Joined: Tue Dec 02, 2008 7:34 pm
Location: Lancaster, Lancashire

Re: Fresh Dutch Midas owner

Postby astonmartine » Sat Nov 07, 2009 3:24 pm

Of course. I never thought of that!
Well, the oil was very old, so that could have been the problem.

Doesn't fix the tractor-like sound above 3000revs though, but at least people will hear me coming :p
User avatar
astonmartine
 
Posts: 63
Joined: Tue Jul 28, 2009 12:38 pm
Location: Netherlands

Re: Fresh Dutch Midas owner

Postby manifold » Sat Nov 07, 2009 3:51 pm

I would be checking on valve clearances (sticky valve)? ignition leads/plugs and inlet gasket. Often if inlet part of gasket is leaking (leaning out) it will cause misfires. Nip up nuts on studs or change gasket.

Another one. Make sure your needle is correct. Some daft person put wrong needle in mine before I got it. Changed needle to a near correct one. Did some subtle adjustments to the taper and it was perfect. Old needle was a mile out (too fat), causing misfire at higher revs.

People just plonk different carbs on and expect it to work without considering jetting, springs, needle, chokes etc. Thats a bad no no, unless your really lucky.
Midas Cars Forum Founder & Midas Facebook Group Page Founder (personal facebook account deactivated)

Midas Gold Convertible: 1380

Midas Gold Coupe: 1380
User avatar
manifold
 
Posts: 1787
Joined: Tue Dec 02, 2008 7:34 pm
Location: Lancaster, Lancashire

Re: Fresh Dutch Midas owner

Postby astonmartine » Sun Nov 08, 2009 9:03 am

Thanks for the top tips. I'll check everything asap.
User avatar
astonmartine
 
Posts: 63
Joined: Tue Jul 28, 2009 12:38 pm
Location: Netherlands

PreviousNext

Return to The Doorbell - Introduce yourself

Who is online

Users browsing this forum: No registered users and 0 guests