by Hans Efde » Wed Nov 24, 2010 11:14 pm
Story in TGT 58. Car was built by Richard Brabbins:
Hello Hans,
I made the front mods myself. The shape is standard, but the joint is formed by jig
sawing a new separation line, inserting an aluminium sheet, laminating to both
sides, then joining the original bonnet to the original front apron. There is a new
cut below the bumper. The whole thing tilts forward on reversed parrallelogram
hinges from a Morris Marina, resting without the need for a prop. The weight and
strength are unaffected. The lower front is tied to the inner wings via metal box
section, and the hinges are mounted on these bracing pieces. It works well. I did it
many years ago. Nowadays I do more advanced moulding and have designed my own all
composite bodied GT car. No chassis, just aircraft composites, vacuum formed and
cured in my own oven.
I hope I have answered you well. Do please
let me know. Many thanks for your interest.
Regards, Richard.