Setting toe in/out??

Please use this forum to detail how to do various tricky jobs on your Midas.
Your endeavours may help others following your path in the future. Tip.... Photos/Pictures speak a thousand words. Midas related FAQs are also in here.

Moderator: The Midas Forum Staff

Post Reply
gooseman
Posts: 51
Joined: Wed Jun 17, 2009 6:37 pm

Setting toe in/out??

Post by gooseman »

My front tires are wearing on the outside edges and i believe its due to the toe setting...is there a quick & dirty way to check this setting???
Im sure if i go to an alignment shop they will be overwhelmed with the Midas being used to run of the mill american & jap cars...thanks, jim
manifold
Posts: 1824
Joined: Tue Dec 02, 2008 7:34 pm
Location: Lancaster, Lancashire
Contact:

Re: Setting toe in/out??

Post by manifold »

Hi Jim

if its scrubbing on the outside (wheels pointing inwards), the tracking needs adjusting so that the steering arms are shorter. Opposite can be said if its scrubbing on the inside. Either that or worn bushes or ball joints somewhere.

You will find that the steering wheel will feel easier to steer when its set up right.

Some people use a string to check tracking. From front to front. Rear to rear of tyre to measure correction.

Kind regards,

David
Midas Cars Forum Founder & Midas Facebook Group Page Founder (personal facebook account deactivated)

Midas Gold Convertible: 1380

Midas Gold Coupe: 1380
Post Reply

Return to “How to Guides & Frequently Asked Questions (FAQs)”