Wheels don't fill arches

b1zbaz · Post by **b1zbaz** » Thu Sep 27, 2012 8:50 pm

I want my wheels to stick out about an inch or 25.4 mm further into the arch is this a possible/difficult task to achieve its mainly the rears that look a bit pants I'm sitting on metro turbo alloys

: ImageUploadedByTapatalk1348774976.433055.jpg (250.23 KiB) Viewed 11777 times

Alan D. · Post by **Alan D.** » Thu Sep 27, 2012 9:18 pm

Metro turbo wheels have a "C" distance ( or offset) of 133mm, so the wheels are inset it the car, my convertible has wheels with a "C" distance of 115mm. This "C" dimension or wheel offset would give you the look which you require.

Sorry for the large image, but right click on your mouse and select; "open image in a new tab". Then open the new tab, which should be at the top of the page.

Alan

lankyjames · Post by **lankyjames** » Thu Sep 27, 2012 9:32 pm

Any mini shop will sell you wheels with the offset you want baz!

Here's a photo of mine, I have 12x6" minilites that stick out nicely and dont annoy the MOT man

: uploadfromtaptalk1348777315933.jpg (100.47 KiB) Viewed 11770 times

I would like some 13's....though I do worry if they will rub on full lock!

Alternatively you could get spacers but I wouldn't advise it and you'll miss put on having a nice dish with new wheels!

Alan D. · Post by **Alan D.** » Thu Sep 27, 2012 9:35 pm

lankyjames wrote:Any mini shop will sell you wheels with the offset you want baz!

Here's a photo of mine, I have 12x6" minilites that stick out nicely and dont annoy the MOT man

uploadfromtaptalk1348777315933.jpg
I would like some 13's....though I do worry if they will rub on full lock!

Alternatively you could get spacers but I wouldn't advise it and you'll miss put on having a nice dish with new wheels!

Mini wheels don't fit on Baz's car, they are Metro wheels, with limited availability!

Alan

lankyjames · Post by **lankyjames** » Thu Sep 27, 2012 9:46 pm

Are the pcd's different?

Rich · Post by **Rich** » Thu Sep 27, 2012 10:25 pm

Which rear drums are you using? Mine have approx 1" spacers built in.

b1zbaz · Post by **b1zbaz** » Fri Sep 28, 2012 7:41 am

Not sure about the rear drums but James has hit the nail on the head I need wheels with a deeper dish to finish my car off can anybody photoshop minilites with black centres onto this image please

: ImageUploadedByTapatalk1348813988.834541.jpg (216.55 KiB) Viewed 11751 times

lankyjames · Post by **lankyjames** » Fri Sep 28, 2012 11:51 am

Baz I apologise for this very bad photoshop - I am at work and did it online with pixlr.com;

: bazlol.PNG (366.31 KiB) Viewed 11744 times

Alan D. · Post by **Alan D.** » Fri Sep 28, 2012 11:54 am

lankyjames wrote:Are the pcd's different?

James you are correct, the A series Metro is the same PCD as the Mini, it's the Rover Metro which is different. Sorry my error! I know that the mini offset will not fit a Metro car. In fact Mini wheels don't fit the rear of Mk1's & 2's very well, without spacer or Minifins.

Regards Alan

lankyjames · Post by **lankyjames** » Fri Sep 28, 2012 12:01 pm

Alan D. wrote:
lankyjames wrote:Are the pcd's different?
James you are correct, the A series Metro is the same PCD as the Mini, it's the Rover Metro which is different. Sorry my error! I know that the mini offset will not fit a Metro car. In fact Mini wheels don't fit the rear of Mk1's & 2's very well, without spacer or Minifins.

Regards Alan

No problem Alan, I thought I was wrong with the PCD's and completely unaware.

While I have minifins on the rears- why do you say that mini wheels won't fit the rears of Mk1/2's very well?

Midas Cars Forum - www.midascarsforum.com