tire size

Moderator: The Midas Forum Staff

User avatar
The Sheepherd
Posts: 66
Joined: Fri Oct 16, 2009 7:20 pm
Location: Bischem, Germany

Re: tire size

Post by The Sheepherd »

Why talking about tyre-sizes that are no longer available? At least I found no ones in germany...
User avatar
Hans Efde
Posts: 1732
Joined: Sat Dec 06, 2008 10:11 pm
Location: IJlst, Netherlands

Re: tire size

Post by Hans Efde »

Hi David,
With nervous I did not mean that's it's all over the road. It's just that the car instantaneously reacts to the input from the steering wheel. I like it! I think it is a positive feature over the fatter tyres, but no everyone will agree. Concerning the rubbing, it's not on the edge of the arches but somewhere inside. I haven't checked where. I am not sure how the offset can influence the interference. These wheels were the standard for Midas Gold coupees. I have to say my Dynamic wheels are a bonus of this car. They have some damage but are worth repairing (if I haven't sold the car).
User avatar
Hans Efde
Posts: 1732
Joined: Sat Dec 06, 2008 10:11 pm
Location: IJlst, Netherlands

Re: tire size

Post by Hans Efde »

The Sheepherd wrote:Why talking about tyre-sizes that are no longer available? At least I found no ones in germany...
It's just that I was surprised that the 175/50 have such different behaviour and allow much tighter cornering. If you can live with the slightly higher revving on the highway the 175/50 are the best tyres. But if I wanted I am sure I could find somewhere stock with 165/60 tyres.
User avatar
The Sheepherd
Posts: 66
Joined: Fri Oct 16, 2009 7:20 pm
Location: Bischem, Germany

Re: tire size

Post by The Sheepherd »

I like the 175/50s, and the Autobahn is not really the territory of the Midas so I'm ok with the higher revs needed...
I searched a lot for the good ol' 165/60's, and maybe some shops have some, but the producing stops and so it's better to find a alternative now...even ones in stock get old and I'm not sure when the last ones were made...
manifold
Posts: 1824
Joined: Tue Dec 02, 2008 7:34 pm
Location: Lancaster, Lancashire
Contact:

Re: tire size

Post by manifold »

Like Geoff I bought a set of some 165/65 x 13 tyres for my Midas Gold Coupe today and I can happily report they don't rub. Probably right up on the limit as far as they can go though.They don't seem to have wide shoulders which might explain why they are OK.

These are fitted on a standard ride height car.

Make of tyre is Avon CR322's

Just thought I'd share my results.
Midas Cars Forum Founder & Midas Facebook Group Page Founder (personal facebook account deactivated)

Midas Gold Convertible: 1380

Midas Gold Coupe: 1380
b1zbaz
Posts: 787
Joined: Mon Jun 28, 2010 8:38 am

Re: tire size

Post by b1zbaz »

im using falken ziex think they are 175 60 13 and they dont seem to rub
manifold
Posts: 1824
Joined: Tue Dec 02, 2008 7:34 pm
Location: Lancaster, Lancashire
Contact:

Re: tire size

Post by manifold »

Might be worth doing a list of known working brand and size of tyre with backspace working combinations.

The backspace I was using today was 115mm.

- 115mm, Avon CR322 165mm/65% x 13" tyre
Midas Cars Forum Founder & Midas Facebook Group Page Founder (personal facebook account deactivated)

Midas Gold Convertible: 1380

Midas Gold Coupe: 1380
max midas
Posts: 181
Joined: Tue Dec 02, 2008 11:32 pm
Location: somewhere under the engine - again!

Re: tire size

Post by max midas »

When I tried to buy a pair of 175 50 13 Yokos recently, all my local tyre places said there were only two tyres left in the country!
Now either there's a massive tyre company conspiracy going on, or they all get their tyres from one importer.
I bought mine online from Minispares instead, they had plenty of stock as they are their own importer, and when p+p, fitting and balancing were included, they were still cheaper than buying from my locals tyre shops!
Post Reply

Return to “Mk 3 Convertible”